KD100M series mini Three Phase Variable Frequency Drive high performance drive V/F control mode. With 485 communication port, equipped with Modbus communication, superior performance, compact structure, small size, high precision, easy operation, high reliability, multi-layer protection,

The built-in PID makes it easy to implement a closed-loop process control system that can operate up to 16 speeds. With swing frequency and fixed length control, it can be used in wind turbines, water pumps, textiles, paper, food and various automated production equipment.

Item	Technical Index	Specification
Input	Input voltage	1AC 220~240V±15%
		3AC 220~240V±15%
	Input frequency	50/60Hz±5%
Output	Output voltage	0~rated input voltage
	Output frequency	0~6000Hz
Control Features	Control mode	V/f control
	Starting torque	1Hz/150% (V/f)
	Operation command mode	Keypad control
		Terminal control
		Serial communication control (Modbus)
	Acceleration/deceleration mode	Straight line/S curve; four kinds of acceleration/deceleration time, range: 0.0s~65000s
	V/f curve	Three types: linear, multiple point and square type   (1.2 power, 1.4 power, 1.6 power, 1.8 power, square)
	Simple PLC & multi-step speed operation	It can realize a maximum of 16 multi-step speeds running via  the built-in PLC or control terminal.
	Built-in PID	Built-in PID control to easily realize the close loop control of the process parameters (such as pressure, temperature, flow, etc.)
Control Function	Over-voltage & over-current stall control	Limit current & voltage automatically during the running process, prevent frequent over-current & over-voltage tripping
	Torque control	Torque control without PG
	Wobble frequency control	Multiple triangular-wave frequency control, special for textile
	Timing/length/counting control	Timing/length/counting control function
	Fault protection function	Comprehensive protection includes overcurrent, overload, overvoltage, low voltage protection, overheat protection, ground protection, and output deficiencies. Detailed operational data can be recorded when a fault occurs.
Input/output terminals	Output terminals	1 set of relay outputs,
		4 sets of multi-function programmable digital input terminals
		2 anaalog outputs, 0~10V / 4~20mA
	Communication terminals	Build-in standard RS485 communication interface, support  MODBUS-RTU communication protocol
Environment	Ambient temperature	-10~50°C, without direct sunshine.
	Humidity	90%RH or less (non-condensing)
	Altitude	≤1000M: output rated power, >1000M: output derated
	Storage temperature	-20~60°C